1. You can now buy finished microcontroller project from us, Check out the Store for the complete list of projects.
  2. Need a custom project, Send us some details about your project. So that we can quote the price for it.

bluetooth connection

Discussion in 'Bluetooth' started by shri ram, Jan 3, 2011.

  1. shri ram

    shri ram New Member

    Likes Received:
    0
    Trophy Points:
    0
    Dear Sir,


    How we send the data from Laptop (Inbulit bluetooth) to the Bluetooth module (SSP base)which TX and RX pin is connected to the microcontroller(8051).
    Which software we can use to transfer the data as hyperterminal ?

    Thanks,
    SHRI RAM
  2. Binu

    Binu Administrator

    Likes Received:
    147
    Trophy Points:
    63
    Yes you can use Hyper terminal.
    Else search google for alternative for hyperterminal.
    Some of them are Serial watcher, hercules etc
  3. shri ram

    shri ram New Member

    Likes Received:
    0
    Trophy Points:
    0
    Dear sir,

    Thanks for reply,

    Which com port No. will be used using hyper terminal ?
    How we find the com port No. of the PC bluetooth?
    till now I used only for hardwire connection for serial port.
    How hyperterminal will be used for data transmission via laptop bluetooth ?
    I wants Laptop bluetooth for Transmitting the data
    on RX side my bluetooth module is connected microcontroller and display on LCD .

    Thanks,

    SHRI RAM
  4. Binu

    Binu Administrator

    Likes Received:
    147
    Trophy Points:
    63
    Goto the Control panel and then to system properties. Then view the Device manager.
    In it you can see a tab for ports with there port number.
    [​IMG]
  5. shri ram

    shri ram New Member

    Likes Received:
    0
    Trophy Points:
    0
    Dear sir,

    My bluetooth module is connected with microcontroller and microcontroller sends continuous data to the bluetooth module (TX,RX,GND) ssp compatible.I am using desktop with usb bluetooth dongle and using dongle software i successfully paired with the bluetooth module. In dongle software my bluetooth module shows COM4 ssp connection . IF i open the hyperterminal of PC for receiving the data which i am sending by microcontroller .
    Is com4 port is suitable for connection bcse software shows it is virtual port for bluetooth module?
    but if i use com4 no data receive on hyperterminal.
    In device manager com1 to com12 port are shows which one port will be for right connection ?
    My dongle also usb type is it can suitable for serial com4 port? or install any other software for usb to serial conversion?

    Please help me
    i will be very thankful to you

    SHRI RAM
Loading...

Share This Page