+ Reply to Thread
Page 1 of 11 1 2 3 ... LastLast
Results 1 to 10 of 109

Thread: PC Based Robot (AT89C2051)

  1. #1
    Administrator Binu is an unknown quantity at this point Binu's Avatar
    Join Date
    Jun 2007
    Location
    Nagercoil, Tamilnadu, India.
    Posts
    6,126

    Default PC Based Robot (AT89C2051)

    The advent of new high-speed technology and the growing computer capacity provided realistic opportunity for new robot controls and realization of new methods of control theory. This technical improvement together with the need for high performance robots created faster, more accurate and more intelligent robots using new robots control devices, new drives and advanced control algorithms.
    This project describes a new economical solution of robot control systems. The presented robot control system can be used for different sophisticated robot applications. The control system consists of a PC, a microcontroller that collects data from the PC and control the robot.
    The intelligent control software, which has been developed using high-level graphical programming language (visual basic). A complete solution of a robot control solution is presented in this project. The robot was fully controlled by the PC and the commands from the PC were received by the microcontroller. The wireless video camera, which was embedded on the robot capture the video and it was transmitted and the image, was viewed over the windows. The robot can be used in military applications.
    Program: pc_robo.zip


  2. #2
    Junior Member funny
    Join Date
    Aug 2007
    Location
    rajsthan, India.
    Posts
    2

    Default


    where is visual basic software for this project.
    there is only microcontroller program.

  3. #3
    Junior Member afzal_saif
    Join Date
    Aug 2007
    Location
    MH, India.
    Posts
    1

    Default

    the VB frontend software is not there..... can u guys pls upload that.......anyways Thanx a lot guys...... gr8 job....

  4. #4
    Administrator Binu is an unknown quantity at this point Binu's Avatar
    Join Date
    Jun 2007
    Location
    Nagercoil, Tamilnadu, India.
    Posts
    6,126

    Default

    The Visual Basic Source code has been added Now.

    1.The circuit diagram is also changed now
    2. Its a Readymade wireless camera, the receiver output is connected to the PC using a TV turner card.
    3. For this project buy a readymade Remote controlled car which has a Remote with buttons front, back, left, right. Remove the buttons from the transmitter circuit and connect the connections from the circuit to the corresponding switches.
    4. The direct assembly language program can be downloaded from the projects page.


    J.Binu
    Click here to Assemble your 8051 Codes online

  5. #5
    Member chetnbt
    Join Date
    Sep 2007
    Location
    karnataka, India.
    Posts
    70

    Default

    How much does a wireless camera cost!!!!

    CBT

  6. #6
    Administrator Binu is an unknown quantity at this point Binu's Avatar
    Join Date
    Jun 2007
    Location
    Nagercoil, Tamilnadu, India.
    Posts
    6,126

    Default

    you can get some imported china made wireless camera for around Rs.1500-2000.

  7. #7
    Junior Member umairsaleem_88
    Join Date
    May 2008
    Location
    , pakistan, Pakistan.
    Posts
    2

    Default

    hello!
    i have to made a microcontroller project and i during search on google finds this fourm very helpful and i want to made pc controlled robot as described in this fourm. but i am very new to this field and even have no detailed knowledge of 8051. kindly guidline me through the steps which i must follow to achieve this project and provide me the necessary urls that contains information about this project or any thing related to this. thanks alot.

  8. #8
    Administrator Binu is an unknown quantity at this point Binu's Avatar
    Join Date
    Jun 2007
    Location
    Nagercoil, Tamilnadu, India.
    Posts
    6,126

    Default

    Download the program from the site and make HEX file with help of the assembler.
    for making hex file check here
    http://www.8051projects.info/forum/t...p?TOPIC_ID=173
    after that make the hardware and burn the hex file into the chip with help of the burner

  9. #9
    Junior Member DL03 DL03's Avatar
    Join Date
    Nov 2007
    Location
    Manila, Philippines.
    Posts
    25

    Default

    Is this robot wired or wire less?

  10. #10
    Administrator Binu is an unknown quantity at this point Binu's Avatar
    Join Date
    Jun 2007
    Location
    Nagercoil, Tamilnadu, India.
    Posts
    6,126

    Default

    Wireless.


+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts